This is how to use the Miroflex
Please click at the picture to see it larger.


1. Sit or stand good...

...in a desired position and posture. If possible; sit with your back straight on a good chair with a lumbar support or something similar.

 

 

2. Pull the mirrors close...

...to your face. The closer you have the Miroflex the bigger is the surface you will see at your hands.

 

 

3. Adjust the height...

...through holding as far back as possible on the aid. For correct height look forward and slightly down, into the mirror furthest back.

 

 

4. Angle the U-bow...

...in order for you to look over the first mirror and into the mirror behind in a comfortable way.

 

 

 

5. Angle the far mirror...

...so that the closest mirror entirely will be seen in the mirror furthest away.

 

 

6. Angle the closest mirror...

...so that it will show the surface on the table you want to look at.

 

 

7. Lighting on the working surface...

...you will get with the light switch.

 

 

How to clean the Miroflex

Clean it only with a very soft tissue. Do not (!) use hard tissues or material with sharp edges against the mirrors. The sensitive mirrors are special produced and may be scratchy on the surface. Use a regular window cleaning detergent. The rest of the aid may be wiped off with a lightly moist tissue.

 

 

 

 
 

Move away the Miroflex easily...

...when you are in no need for it. And it may easily be pulled back in a functional position when you want to use it again.